ES283D

ES283D

FEATURES

• Maximum power in mobile, compact, light weight body
• Control process speed to produce super fine or larger chips
• For composts, mulching, making pellets or bio-energy
• Made in Japan – Japanese quality and reliability

Chipping to meet your demands

Use for composts, mulching, making pellets, pathways, landscaping or bio-energy. Choose the size to suit your needs! * Large chips, called pinchips may be occasionally discharged in material.

Utilisation facile du rotor

The rotor clutch can be engaged/disengaged by flicking a switch. New function for this model.

Adjusting chip size

The processing speed is adjustable by turning the “Flow Controller”. Chip size can be changed between 2-16mm.

* Uniform sized chips are produced with screen. (Screens are optional)

Economical “Feeding blades”

Feeding blades on feed roller are replaceable. If the blades become worn, you only need to change blades.

Fuel-saving mode

Easily switch between “Normal mode” and “Branch mode”. Small branches of max. dia. 9cm are chipped with “Branch mode”, and more fuel savings can be achieved.

* Des copeaux de taille uniforme peuvent etre obtenus avec un tamis. (Les tamis sont disponibles en option)

Automatic No Stress Control

An automatic hydraulic No Stress control system, communicates with the feed roller ensuring stable and efficient feeding of materials.

Micro-computer No Stress control

Safety design

Brake Lever

The brake lever is gripped to transport the vehicle. When released the parking brake will be activated automatically.

Feed Roller Safety Bar

Allows user to stop the feed roller in an emergency and if necessary without using their hands.

Excellent chipping efficiency

• Finely chip leafy branches.
• Wide hopper allows easy feeding of leafy branches.
• Robust and durable body.
• Change between reverse / forward feed with one switch.
• Easily transportable at just over 1.2 t.
• High grade knife specification. To chip materials where something hard like nails may be attached the enhanced knife is recommended.

Screens with various hole sizes

To adjust chip size and to produce uniform sized chips just change the screen. Screens with various hole sizes: 6, 8, 10, 12, 18, 25 mm
※6mm holed screen must be used with vacuum collector.

Processed chips

Different chip sizes suit different purposes. Choose the hole size of the screen based on your needs.

To discharge chips below

Side shooter

Conveniently discharge chips below when chipping in places where a high shooter may cause obstructions like an orchard.
※Can not be used in combination with the high shooter.

※Screen available (Screen hole size should be 8mm or more.) 　6mm holed screen must be used with a vacuum collector.

For chipping grass and bark

Flat blade set

Attaching flat blade to the feed roller to avoid clogging on sharp edges.
※ Grass containing more water, should be discharged via the side shooter because chipped grass might clog up the high shooter. Do not use with screen.

Vacuum Collector 

• Attaching the optional vacuum collector to the low dispatch unit allows processed chips to be efficiently collected and packed without raising dust.
• The collector is on casters for transportation.

※Can’t be used in combination with the shooter.
※Available with screen.
6mm holed screen must be used with a vacuum collector.

• Less dust while discharging
  Dust can be a problem at chipping sites. ESC282D can decrease the dust with attached cyclone.
• Cyclone can be easily removed / attached
• Chips can be directly discharged to a large easily attached flexi bag.
  Chips are discharged directly to flexi bag, which is ready to move.

※Can not be used in combination with vacuum collector, side shooter or screen.
※Flexi bags are not included.